ppm 10xx – your smart GPS solution for mobile GIS data

GIS mapping using the ppm 10xx GNSS Sensor.
The USB GPS receiver to complement your tablet or smartphone..

Use your TabletPC for reliable precision mapping – it’s that simple!

10xx GNSS Sensor + Tablet

GPS-GIS mapping made easy!

Increase your tablet’s or smartphone’s accuracy, and use it for GIS mapping purposes..

Select the required accuracy..

Submeter Genauigkeit

SUBMETER

Single frequency receiver with GPS & GLONASS plus helix antenna

Dezimeter Genauigkeit

DECIMETER

Dual frequency receiver with GPS & GLONASS plus helix antenna

Zentimeter Genauigkeit

CENTIMETER

Dual frequency receiver with GPS & GLONASS plus geodetic antenna

> TECHNICAL DETAILS

GNSS systems ¹)

  • GPS L1 / L2 / L2C / L2P / L6
  • Glonass L1 / L2 / L3 / L6
  • Galileo E1 / E5 AltBOC / E5a / E5b / E7
  • Beidou B1 / B2 / B4
  • QZSS L1 C/A / L1C / L2C / L5 / LEX
  • SBAS L1 / L6
  • 14 up to 555 channels

Output rates

  • 1 Hz up to50 Hz

Firmware options

  • Raw data output
  • DGPS base / RTK base
  • DGPS rover / RTK rover

Connections

  • USB port: 1
  • GNSS antenna port: TNC female  (5V – max. 50mA)

1) depends on GNSS board inside: · NovAtelOEMstar: 14 channel GPS+GLONASS L1 · NovAtel OEM617: 120 channel L1/L2 · NovAtel OEM617: 120 channel L1/L2 GPS + GLONASS + GALILEO + COMPASS · NovAtel OEM719: 555 channel L1/L2/L5 GPS + GLONASS + GALILEO + COMPASS

 

Accuracy ²)

  • GNSS only (m): 1,5
  • SBAS (m): 0,5
  • DGPS (m): 0,3
  • PPP (m): 0,05 to 0,30 – depends on used data
  • TerraStar-L (m) 0,4
  • TerraStar-C (m) 0,04
  • RTK Fixed (m): 0,010 + 1 ppm

Specifications

  • Power input (V DC): 5 or 9 -36 optional
  • Power consumption (Watt) ³): <0,5 up to 1,3 max.
  • Operating temperature (°C): -20 to +70
  • Environmental: IP54 (optional IP65)
  • Size (mm): 110 x 30 x 50
  • Weight (gr): 130

2) Accuracy specification may be affected by atmospheric conditions, signal multipath, and satellite geometry. Position accuracy specifications are for horizontal positioning. Vertical error is typical < 2 times horizontal error. Performance values assume minimum of five satellites, following the procedures recommended in the product manual. High multipath areas, high PDOP values and periods of severe atmospheric conditions may degrade performance

3) depends on GNSS board inside: · NovAtel OEMstar < 0,5W · NovAtel OEM617 <1,1W· NovAtel OEM719 <1,2W

10xx + Tablet + Commander Software
10xx + Tablet + Commander Software + GIS

The 10xx GPS Sensor is your tool for multiple mapping applications.

ppm 10xx GPS / GNSS Sensor + GNSS Commander

Your ticket to a world of accurate positioning for mapping.

DIGITAL REGISTERS FOR SPECIAL APPLICATIONS
On-site mobility

Road register


Streetlights


Trees and green spaces


Hunting


Playgrounds


Solar potential


Gas, water, electricity


Telecommunications


Cemeteries


ADDITIONAL USE CASES

Archaeological


Event management


Plant Information Systems (PIS)


Forestry


Agricultural


Protection against avalanches


Environmental protection


The ppm 10xx GNSS Sensor is available as a kit.

It consists of the following components:

GPS + GLONASS Helix Antenne

GPS + GLONASS helix antenna

Offering excellent 360° reception

USB

USB cable

For power and communications

Adapterset

Set of Adapters

To suit different tablet models

GNSS Commander Software

Software GNSS Commander

For configuring the system, connecting to a reference network, and transmitting precise positions to your application.

SIMPLY CONNECT IT.


TO ENABLE PRECISE MEASUREMENTS.


THEN PUT IT BACK INTO YOUR POCKET.


> DISTRIBUTION PARTNERS

Need Help? May we contact you?

Contact us.
We would be pleased to return your call.

For news and EVERYTHING GPS visit

Google+

ppm 10xx GNSS Sensor and GNSS Commander are products made by ppm GmbH

Imprint